SCG353A043 Bag Filter Pulse Jet Valve
|Payment Type:||L/C,T/T,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||4-7 Days|
|Packaging:||Box Carton Pallet|
|Productivity:||44500 sets/ 1 week|
|Place of Origin:||NINGBO CHINA|
|Supply Ability:||180000 sets per week|
Model No.: SCG353A043
SCG353A043 Bag Filter Pulse Jet Valve
The pulse jet valve is one of the components of the bag filter. Different models of bag filter will choose different types of electromagnetic pulse valve. So how do you choose the right pulse solenoid valve for the dust collector? One type of dust collector uses a pulse diaphragm valve style. For example, the low-pressure pulse bag type dust collector uses a submerged pulse valve, but the filter area of the different types of bag filter is different, so the size of the pulse valve is also different. The filter area is large, and the pulse valve with a large size is selected. Instead, select a small pulse valve.
Even for different types of dust collectors of the same model, the pulse valve models may be different if they are arranged in different sizes. Second, the choice of electromagnetic pulse jet valve is related to the number (area) of bags in the same column. In addition, the pulse jet valves of different manufacturers have different requirements on the number of bags for the same type of cloth bags.
Technical parameter of SCG353A043 bag filter pulse jet valve:
Model No SCG353A043 Working Medium Compressed air Valve Type Right Angle Pulse Valve Nominal Diameter φ20 Inlet and Outlet Port Size G3/4'' Inch In and Out Diaphragm Service Life Over one million cycles Voltages AC110V/AC220V, DC24V, or OEM
Relative Humidity ≤ 85% Working Pressure 0.3-0.8 mpa Environment Temperature -5℃~+55℃
Details of G3/4'' Right Angle Port Aluminum Body SCG353A043 Pulse diaphragm valve:
Main components of SCG353A043 Viton/NBR Single Diaphragm Pulse Solenoid Valve:
Application field of SCG353A043 electromagnetic pulse valve in dust collection bag filter:
Introduction of baghouse dust collector with SCG353A043 pulse compressed air valve:
Structural principle: Bag filter, also known as filter dust collector, is a dry high-efficiency dust collector that uses bag filter elements made of fiber fabric to capture solid particles in dusty gas. The principle of action is that the dust particles are intercepted by the inertial force and the fiber collision when the fiber is wrapped around the filter cloth. The fine dust particles (having a particle size of 1Lm or less) are constantly changed by the impact of gas molecules (Brownian motion). Since the gap between the fibers is smaller than the free path of the Brownian motion of the gas molecules, the dust particles collide with the fibers. Was separated. The working process is related to the weaving method of the filter material, the density of the fiber and the diffusion of the dust, inertia, occlusion, gravity and static electricity, and the cleaning method. The filter cloth material is the key of the bag filter; the filter cloth with good performance should have good corrosion resistance, heat resistance and high mechanical strength, and good heat resistance, in addition to specific density and gas permeability. Fiber, its heat resistance can now reach 250 ~ 350 °C.
Bag-type dust collectors can be divided into five types: vibrating type, gas ring back-blowing type, pulse type, acoustic wave type and composite type according to different cleaning methods. The pulse back-blowing type can be divided into high-pressure pulse back-blowing type and low-pressure pulse back-blowing type according to the difference of back-blowing air pressure. The pulse back-flush bag filter can be adjusted due to its pulse blowing intensity and frequency, and has a good cleaning effect. It is currently the most widely used dust removal device in the world. After the dust-containing gas enters from the inlet of the baghouse, the diversion pipe enters each unit room. Under the action of the flow guiding device, the large particle dust separates directly into the ash hopper, and the remaining dust uniformly enters each chamber with the airflow. In the area, the filtered clean gas permeating filter bag is discharged through the upper tank, the poppet valve, and the exhaust duct. As the filtration condition progresses, when the surface dust of the filter bag reaches a certain thickness, the lifting valve is closed by the cleaning control device (differential pressure or timing, manual control) according to the setting program, the current unit is controlled to be offline, and the electromagnetic pulse valve is opened. Spray the dust off the filter bag. The dust falling into the ash hopper is discharged through the ash discharge valve and sent out by the ash conveying system.
Welcome to your inquiry!
BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.
BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.
BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.
Quick review of BRANDO products:
- Company Name: NINGBO BRANDO HARDWARE CO.,LTD
- Representative: Lu Jin Jun
- Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
- Capital (Million US $): 1000,000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Ningbo
- Contact Person: Mr. Brandon Bao
- Tel: 86-0574-83879820
Premium Related Products